Technical documents

Use this page for technical support material related to supported device capacity, compatible device families, and controller-specific wiring references for EnergyLogger.

Communication Support

The following table shows the supported device capacity for the EnergyLogger communication stack.

Device type VikMote IX400 Standard
Electricity meters 24 12
Water meters 12 2
Heat meters 12 2
Key readers 6 6
Lamps 16 -

Compatible Device Families

The following summary lists the meter and device families that the EnergyLogger communication setup can use through the shared driver system.

Device type Manufacturer Supported models Communication
Electricity meter Carlo Gavazzi ADM, EM23, EM24, EM33, EM111, EM210, EM330, EM340, EM530, EM540, WM30, WM40, EM511 Modbus RS485, wireless MBus, or pulse depending on model
Electricity meter EMIKO ADM, EMI511, EMI530, EMI540 Modbus RS485
Electricity meter Orno OR-WE-516, OR-WE-525 Modbus RS485 or pulse depending on model
Electricity meter Janitza Standard profile Modbus RS485
Electricity meter Any manufacturer Pulse counter Pulse input
Heat meter Kamstrup MULTICAL 302, MULTICAL 303, MULTICAL 402, MULTICAL 403, MULTICAL 602, MULTICAL 603, MULTICAL 801, MULTICAL 802, MULTICAL 803 Modbus RS485 or MBus RS485 depending on model
Heat meter Any manufacturer Pulse counter Pulse input
Water meter Kamstrup MULTICAL 61, MULTICAL 62, MULTICAL 21, flowIQ 2200, flowIQ 3100, flowIQ 3200, flowIQ Gateway, MULTICAL 603 as water meter Modbus RS485, wired MBus, or wireless MBus depending on model
Water meter Sensus HRI-B4 module, HRI-Mei B4 module, iPERL Modbus RS485, pulse, or wireless MBus depending on model
Water meter Comac Cal Flow 38 Modbus RS485
Water meter Any manufacturer Pulse counter Pulse input
Key reader Conland All supported models OSDP RS485
Lamp Various DALI-capable luminaires DALI
Gateway RESI Modbus/MBUS and Modbus/DALI converters Serial protocol conversion

Controller IO Lists


Public revision 21/08/2026