VikMoteController with built-in GSM and data logger. IODigital input/output. liste

VikMote VX40 input/output list for ServicePedestal equipmentEquipment such as a ServicePedestal or WaterStation..

VikMoteController with built-in GSM and data logger. VX40 - Power Supply

Digital inputs	Use	Terminal	Note
1	Pulse signal from energy meter to power outlet 1	40 (NPNNPN is a negative signal (minus).)	Factory-set to S0IEC 62053-31 Class A S0 standard for pulse signals., jumper JP8 position 1-2 is installed
2	Pulse signal from energy meter to power outlet 2	41 (NPNNPN is a negative signal (minus).)	Factory-set to S0IEC 62053-31 Class A S0 standard for pulse signals., jumper JP9 position 1-2 is installed
3	Pulse signal from energy meter to power outlet 3	42 (NPNNPN is a negative signal (minus).)	Factory-set to S0IEC 62053-31 Class A S0 standard for pulse signals., jumper JP10 position 1-2 is installed
4	Pulse signal from energy meter to power outlet 4	43 (NPNNPN is a negative signal (minus).)	Factory-set to S0IEC 62053-31 Class A S0 standard for pulse signals., jumper JP11 position 1-2 is installed
5	Operating signal from main contactor to power outlet 1	44 (PNPPNP is a positive signal (plus)., 24VDC)
6	Operating signal from main contactor to power outlet 2	45 (PNPPNP is a positive signal (plus)., 24VDC)
7	Operating signal from main contactor to power outlet 3	46 (PNPPNP is a positive signal (plus)., 24VDC)
8	Operating signal from main contactor to power outlet 4	47 (PNPPNP is a positive signal (plus)., 24VDC)

Digital outputs	Use	Terminal	Note
1	Contactor for power outlet 1	30 (NONormally open., on/off output, 24VDC)	Factory-set to on/off output with command DWTYPE Use a transfer relay if the main contactor is 230V, if required
2	Contactor for power outlet 2	31 (NONormally open., on/off output, 24VDC)
3	Contactor for power outlet 3	32 (NONormally open., on/off output, 24VDC)
4	Contactor for power outlet 4	33 (NONormally open., on/off output, 24VDC)
5	-	34
6	-	35
7	-	36
8	-	37