OceanWatcher Level Sensor Settings

This page is the short product note for OceanWatcher level sensors. Use OceanWatcher Settings for the full parameter flow.

Setup Flow

• For analog level sensors, set OWAMLEV, TMIN#, TMAX#, VRDMPV#, VRDMPT#, and, when needed, OWAFORSK# on the main OceanWatcher settings page.
• For Siemens radar over RS485 Modbus, configure DEVMODEL# and the related driver communication profile on Driver Communication Settings.
• For values that must be sent to Emiko, continue with DataGuard via analog inputs or DataGuard via driver communication.

Siemens Radar Local Settings

When the level sensor is configured locally with the handheld remote, use millimetres and a 0 to 6000 mm scale unless the installation drawing specifies another range.