WeatherStation supported instruments

Use this page to select the instrument path for a WeatherStation installation. See Instrument Families for the common list across products.

RS485 and driver instruments

Device	DEVMODEL#	Connection path	WeatherStation use	Setup
Thies Clima - Auto	107109100	RS485 / serial driver	Auto-detect supported Thies Hydro Termo Baro variants.	Driver
Thies Clima - WSC10	107109102	RS485 / serial driver	Compact weather station values.	Driver
Thies Clima - WSC11	107109103	RS485 / serial driver	Weather values such as wind, precipitation/status options, brightness/radiation, temperature, humidity, pressure, and GPS/time data.	Driver
GILL - MaxiMet GMX600	107110101	RS485 / serial driver	Compact weather station values including wind, temperature, humidity, pressure, precipitation, and compass/GPS options.	Driver
OTT CBS - Bubble Sensor	107111101	RS485 / serial driver	Water level by bubble sensor principle.	Driver
Siemens - SITRANS LR110	107116101	RS485 / serial driver	80 GHz radar level measurement up to 15 m.	Driver
Siemens - SITRANS LR120	107116102	RS485 / serial driver	80 GHz radar level measurement up to 30 m.	Driver

Analog instruments

Instrument	Connection path	WeatherStation use	Setup
Thermo/Hygro transmitter	2 x AI	Temperature and humidity through analog transmitter signals.	Analog
Wind direction transmitter	AI	Wind direction from a 4-20 mA or 0-10 V analog signal, including current, 2-minute, 10-minute, spread, and state/QC reporting when DataGuard selectors are configured.	Analog
NRG 200M wind vane	Voltage AI	WeatherStation wind direction through DataGuard selector VRDATATYPE# 9012. The selector uses the 0.007 to 2.5 VDC signal and formula degrees = volts * 147.91 - 1.460. Use VRTYPE#=2, 4, or 5; do not use 4-20 mA.	Assisted
RNRG/NRG 200P wind vane	Voltage AI	WeatherStation wind direction through DataGuard selector VRDATATYPE# 9013. Use VRTYPE#=2, 4, or 5, and set TMIN#/TMAX# to the conditioned post-input signal range in mV, normally 0 and 2500, 5000, or 10000. Do not use 9012 for 200P.	Assisted
Generic 4-20 mA or 0-10 V transmitter	AI	Project-specific temperature, pressure, level, humidity, or other analog value.	Analog

Digital input and counter instruments

Instrument	Connection path	WeatherStation use	Setup status
Pronamic / Rain Gauge Professional	DI/high-speed counter input	Tipping-bucket precipitation through DataGuard selector VRCDATATYPE# 9009 on a supported X32/NX32/NX32L high-speed counter input with TIN#=1 and rain profiles 2..5: 0,2, 0,1, 0,25, or 0,5 mm/tip.	Assisted
Rain Gauge and Snow sensor Meteorological	DI/counter pulse input and related field-instrument setup	Precipitation and snow-related meteorological registration.	Assisted
Generic pulse instrument	DI/counter pulse input	Meter pulses, pulse flow, or other count-based field values.	Assisted
Thies 4.3519 cup anemometer via counter input (wind speed)	DI/high-speed counter input	Counter-based WeatherStation wind speed through DataGuard selector VRCDATATYPE# 9008, VRCPROFILE#=1, supported X32/NX32/NX32L high-speed counter input, and delivered installation wiring. The profile uses V = 0.07881 * f + 0.32.	Assisted
NRG 40C anemometer	Conditioned DI/high-speed counter pulse input	Counter-based WeatherStation wind speed through DataGuard selector VRCDATATYPE# 9010 with VRCPROFILE#=6. The profile uses m/s = Hz * 0.765 + 0.35. Because NRG 40C is a low-level AC sine-wave sensor, use it only with signal conditioning or a verified clean countable pulse path into the controller input.	Assisted
NRG 40H Hall-effect anemometer	DI/high-speed counter input with external supply and pull-up	Counter-based WeatherStation wind speed through DataGuard selector VRCDATATYPE# 9011 with VRCPROFILE#=7. The profile uses m/s = Hz * 0.765 + 0.35. The open-collector Hall output requires external supply and pull-up wiring for a countable controller input signal.	Assisted

Wind-speed selectors 9008, 9010, and 9011 use the same DataGuard child output values for quality/status, 2-minute speed and gust, and 10-minute speed and gust. v1 supports a maximum of two active wind-speed VRC slots across those selectors.

1-Wire instruments

Instrument	Connection path	WeatherStation use	Setup
1-Wire temperature sensor	1-Wire	Simple local temperature measurement, for example soil or field temperature.	1-Wire

External reference points

Use official manufacturer documentation and the delivered installation specification for final sensor limits, mounting, wiring, and maintenance requirements.