FlexGylle Operation

This page describes FlexGylle operation and operating status commands.

Tank Information

Use the command below to request information from the tank.

CommandSMS command sent to a VikMote device, for example to request status or change a setting.	Function
`GYS`	Replies with the tank's current liquid height and volume.

Alarm Disarming

Temporarily disarm monitoring when the tank is being emptied, for example.

Monitoring is armed automatically again after a predefined time, or it can be armed with the SEON command.

CommandSMS command sent to a VikMote device, for example to request status or change a setting.	Function
SEOFF	Temporarily disarms the monitoring

Alarm Arming

Arm monitoring if it has been disarmed.

CommandSMS command sent to a VikMote device, for example to request status or change a setting.	Function
SEON	Arms the monitoring

Alarm Acknowledgement

Acknowledge alarms.

CommandSMS command sent to a VikMote device, for example to request status or change a setting.	Function
GODKEND	Acknowledges alarms

Receiver List

Request a list of the users who receive messages.

Command	Function
`RECSHOW`	Shows stored message receivers.

Signal Strength

Request the current signal strength to check the GSMGSM (Global System for Mobile Communications) is a widely used standard for mobile communication and data. signal.

Command	Function
`SIGNAL`	Shows the current mobile signal strength.