FlexGylle adgangsindstillinger

Her kan du indstille adgangskoder og oprette brugere som skal kunne betjene udstyret. Fx kan en bruger sende en SMSSMS is a text message that can be sent or received with a mobile phone. for midlertidig at slukke for overvågningen når tanken tømmes .

The listed default values can be changed to match the installation.

Runtime identity and access model

Use these parameters for the local runtime access model when SMS, service commands, or runtime-controlled user rights are required. For normal Emiko App access, approve users in Emiko instead.

System code

Set the system code before the equipment is put into service. The system code identifies the equipment access context used by command-based setup.

Parameter	Index	Range	Format	Default	Example
`SYSCODE`	-	8..20 characters	Current code:new code	Unit serial number	`1234 SYSCODE 11111111:22222222`

Operating code

Change the default operating code before the equipment is handed over. This protects secondary command workflows from using the default value.

Parameter	Index	Range	Format	Default	Example
`CODE`	-	4..8 characters	Text string	1234	`1234 CODE 123abc`

Runtime user identity

Create runtime user identities for users who need limited runtime rights through the secondary command model.

Parameter	Index	Range	Format	Default	Example
`USER`	-	At least 8 characters	Phone number with country code	-	`1234 USER +4599999999`

Administrator identity

Create administrator identities only for technicians or responsible users who need full runtime control through the secondary command model.

Parameter	Index	Range	Format	Default	Example
`ADMIN`	-	At least 8 characters	Phone number with country code	-	`1234 ADMIN +4555555555`