WaterStation Add-Ons

Control box for opening and closing one water outlet.

• Item numberItem number used when ordering from Vikingegaarden A/S.: 1004345

Fits:

• WaterStation

Application:

• Operation of one water outlet
• Used where the control box must be the last unit on a serial connection, or where only one control box is used.

Details:

• Built-in aKeyaKey is a key fob reader for RFID cards, tags, and similar access media. reader
• Cable gland for the communication cable
• IP65 enclosure
• Communication cable is not included
• For loop-through wiring, use the alternative loop-through control-box model shown on WaterStation add-ons.

Important - A 120 ohm resistor must always be fitted across RS485+ and RS485- at the last control box on the serial connection.

Control box for opening and closing a water outletOutlet where water can be drawn from the equipment. with loop-through wiring.

• Item numberItem number used when ordering from Vikingegaarden A/S.: 1004406

Fits:

• WaterStation

Application:

• Operation of one water outletOutlet where water can be drawn from the equipment.

• Used where the control box must be connected in series and loop-through of the communication cables is required.

Details:

• Built-in aKeyaKey is a key fob reader for RFID cards, tags, and similar access media. reader

• Cable glands for 2 communication cables

• IP65 enclosure

• Communication cable not included

 

Important - A 120 ohm resistor must always be fitted across RS485+ and RS485- at the last control box on the serial connection.