Operation

FlexGuard operation and operating status.

FlexGuard can be operated in the following ways:

FlexGuard SMSSend an SMS such as 'SIGNAL' to the device phone number to request the GSM signal.

Restart

Restart the equipment.

Software generation	Command	Function
ProSoft 05.00 B39 and later	`RESTART`	Restarts the runtime in the equipment.
Earlier Danish-language software	`GENSTART`	Restarts the runtime in the equipment.
Earlier English-language software	`RESTART`	Restarts the runtime in the equipment.

Retrieve the equipment's current signal strength.

Command	Function
`SIGNAL`	Shows the current mobile signal strength.

Retrieve the equipment licenses.

Command	Function
`LICENSEINFO`	Shows installed licenses and related license information.

Retrieve the equipment program information and serial number.

Command	Function
`VER`	Shows firmware version and serial number.

Retrieve a list of users who receive messagesMessages sent by the equipment to one or more configured users, for example SMS or email alarms..

Command	Function
`RECSHOW`	Shows stored message receivers.

Temporarily disable monitoring.

Temporarily disable monitoring, for example when service is performed on the equipmentEquipment such as a ServicePedestal or WaterStation. being monitored
- Push button can also be used (option)
Monitoring is re-enabled automatically after a preset time or with command SEON

CommandSMS command sent to a VikMote device, for example to request status or change a setting.	Function
SEOFF	Temporarily disarms the monitoring

Enable monitoring.

CommandSMS command sent to a VikMote device, for example to request status or change a setting.	Function
SEON	Arms the monitoring

Reset alarms.

CommandSMS command sent to a VikMote device, for example to request status or change a setting.	Function
GODKEND	Acknowledges alarms