FlexVander Models

Read the product and controller label. Use the exact model name below before you open wiring or IO information.

Emiko Compatibility

FlexVander

Use the product and controller labels to check whether a FlexVander can use Emiko. Current models support normal Emiko setup. Older installed models must be checked before an upgrade because their hardware, software, and communication setup can differ.

Equipment model	Controller	Platform	Emiko compatibility
FlexVander LX9 eco	VikMote LX9 eco	NX32L	Supported for new installations
FlexVander LX9 pro	VikMote LX9 pro	NX32L	Supported for new installations
FlexVander LX4 pro	VikMote LX4 pro	NX32L	Supported for new installations
FlexVander NX-900	VikMote NX-900	NX32L	Upgrade available after installation check
FlexVander NX-910	VikMote NX-910	NX32L	Upgrade available after installation check
FlexVander AX9 encore	VikMote AX9 encore	NX32	Upgrade available after installation check
FlexVander AX9 turbo	VikMote AX9 turbo	NX32	Upgrade available after installation check
FlexVander DX4i pro	VikMote DX4i pro	X32	Upgrade available as a FlexVander exception after installation check

For an older installed model, record the product label, controller label, serial number, and current communication method. Send these details to Vikingegaarden before planning the Emiko upgrade.

Confirm the Match

The product model and controller label match the selected row.
The terminal names and available IO match the selected IO page.
The electrical drawing belongs to the same installation and revision.

Stop if the label, terminals, or drawing do not match. A similar enclosure does not prove that the wiring is the same.

Next Step

Open Technical Documents for the installation and IO pages that belong to the identified model. Then check the site prerequisites.

Open Technical Documents Check Prerequisites Request an Upgrade Check