Choose a FlexVander model

Start with the current model range when you plan a new FlexVander installation.

• FlexVander LX9 eco: normal model for most new installations. It can be mounted on a vertical surface or built into equipment or panels.
• FlexVander LX9 pro: use when the installation needs more analogue inputs, for example when meteorological sensors are part of the solution.
• FlexVander LX4 pro: use when the controller must be mounted on a DIN rail in an electrical cabinet.

For installations that already use another supported model, use the installation page that matches the installed hardware.

Supported units and upgrade path

Use the installed controller model to decide whether the unit is a current Emiko model, a supported installed unit, a Legacy VMS only unit, or no longer supported. The shared upgrade reference is Equipment Upgrade To Emiko.

FlexVander in Emiko

For new installations, Emiko is the normal daily operating environment. The Partner uses the relevant Emiko Site in Emiko Console and can see the FlexVander Emiko Equipment that has been assigned directly by Vikingegaarden or forwarded through a Reseller.

• The Partner can see where each pump installation is located on the map.
• Map state shows whether the pump is ready, running, or in alarm.
• The Partner can start and stop pumps from Emiko when the installation is configured for Emiko App operation.
• The Partner can approve Customers and employees in Emiko App, remove access again, and keep daily access aligned with the organization. Customers and employees can also unlink from the Emiko Site when the connection is no longer needed.
• Customers and employees can use Emiko App after they have registered and the Partner has approved their access.
• The Partner is not locked to the Reseller that originally onboarded the installation and can remove Reseller access or invite another Reseller.

For the shared platform model behind this, continue to Emiko Ecosystem Overview, Roles And Ownership, Onboarding And Assignment, Access, Permissions And Control, and Emiko Login And Identity.

Core pump control

The core FlexVander function is remote control and monitoring of field irrigation pumps.

• ProgramProgram type installed in the device. 1 controls up to 2 independent pressure pumps.
• ProgramProgram type installed in the device. 2 controls up to 2 pressure pumps together with a shared submersible pump.
• Operating status, total operating hours, operating time since the latest start, alarms, and selected live values can be followed from Emiko.
• Program selection, message recipients, pressure control, and optional values are configured according to the actual installation.

Options that add value in Emiko

FlexVander can add more irrigation follow-up when the installation includes the relevant sensors, meters, or Emiko Modules.

Pressure control

A pressure transmitter can be connected so the Partner can follow live operating pressure in Emiko. Pressure limits are adjusted electronically, and FlexVander can stop or alarm when the configured pressure conditions are not met.

Energy use per pump

Energy meters can show energy use per pump run and per pump. This helps the Partner see what irrigation costs in energy and gives a better basis for comparing fields, pumps, and operating periods.

Weather station values

Available inputs can be used for field measurements such as rainfall, soil temperature, humidity, wind, and wind direction when the required sensors are installed.

Forecast and warnings

When the relevant Emiko Modules or options are part of the solution, forecast and warning features can support irrigation planning, for example around expected rain, wind, evaporation, or conditions that need attention.

DataGuard is used when selected field sensor values must be forwarded and shown in Emiko as weather or field values.

Optional operation methods

Emiko is the preferred operating method for new installations. Depending on the installation, FlexVander can still also be operated by SMSSMS is a text message that can be sent or received with a mobile phone., voice call, or local push button for service or existing operating workflows.

Other Related Pages

The first FlexVander was delivered in 2000, and over time we have delivered thousands of FlexVander installations for remote control of irrigation pumps.

Current model range

Supported installed models

Supported installed models include FlexVander NX-900, FlexVander NX-910, FlexVander AX9 encore, and FlexVander AX9 turbo.