Shared Runtime

Shared Runtime is the common controller behaviour reused across multiple products on the same platform.

Product pages describe the product-specific workflow, while this area documents shared settings, commands, and I/O behaviour that sit below the product layer.

Start Here

Use these pages as the main entry points when you need common controller settings, shared parameter families, or platform behaviour that is not specific to one product.

Controller Settings Identity and Access Communication Core I/O

Use of Shared Runtime

Use Shared Runtime when the same controller-side parameter family is used across multiple products.
Use product pages for commissioning a specific product flow.
Use Shared Runtime when you need the common underlying behaviour, command, or parameter family.

Typical Shared Functions

Identity, access, recipients, and service suppression
General controller settings such as name and voice behaviour
System time, synchronization, communication basics, and power management
Core I/O, 1-Wire, shared driver communication, and grouped logging
Location, light, astronomical control, and diagnostics

How to Use This Area

Start on the product page when commissioning a specific product.
Use Shared Runtime when the same command or parameter family appears across multiple products.
Use the pages below as the shared reference for common controller behaviour.

Other Shared Runtime Pages

Recipients Service Mode Time and Sync Power Management Location and Light Diagnostics and Service