Shared Runtime Identity and Access

Use this page to configure the shared identity and access model for runtime-based products. This includes the system code, administrator password, and the registered phone numbers that act as users or administrators.

The listed default values can be changed to match the installation.
Configure identity and access before remote control, outputs, or other state-changing functions are put into service.
Use the same access model consistently across service staff, operators, and any phone-based control workflow.

System Passwords

Start by securing the shared passwords that protect the runtime access model.

System Code

Use the system code as the shared controller-level password that protects sensitive runtime access.

The shipped default is the controller serial number until the installation changes it.
Use the current code and the new code separated by a colon.
Store the system code securely. If it is lost, the controller may need supplier service.

Parameter	Index	Range	Format	Default	Example
`SYSCODE`	-	8..20 characters	Current code:new code	Unit serial number	`1234 SYSCODE 11111111:22222222`

Administrator Password

Use the administrator password as the shared fallback password for functions that require administrator-level runtime access.

The value must be between 4 and 8 characters.
The shipped default is 1234 until the installation changes it.
The code 1234 cannot be reused as the new value.
Use strong values and document who is allowed to know them.

Parameter	Index	Range	Format	Default	Example
`CODE`	-	4..8 characters	Text string	1234	`1234 CODE 123abc`

Phone-Based Access

After the shared passwords are defined, register the phone numbers that may operate shared runtime functions without sending the shared administrator password every time.

Users

Use users for phone-number-based identities that need limited operating rights.

Use full phone numbers with country code.
Use users for operators who need controlled day-to-day access but not full administrative control.

Parameter	Index	Range	Format	Default	Example
`USER`	-	At least 8 characters	Phone number with country code	-	`1234 USER +4599999999`

Administrators

Use administrators for phone-number-based identities that need full operating rights.

Use full phone numbers with country code.
Use administrators for technicians or trusted staff who must change settings, clear alarms, or perform service actions remotely.

Parameter	Index	Range	Format	Default	Example
`ADMIN`	-	At least 8 characters	Phone number with country code	-	`1234 ADMIN +4555555555`

How Access Is Controlled

In shared runtime, access is controlled through SYSCODE, CODE, USER, and ADMIN.

Use stricter access when outputs or state-changing functions are available remotely.
Keep the access model aligned with the actual support and operator roles in the installation.

Best Practice

Change the shipped passwords before the installation is put into service.
Use ADMIN for technicians who need full control and USER for operators who need limited access.
Review the identity setup before enabling remote control or other active commands.