DWTYPE

Example of how to use the parameter DWTYPE.

Use this parameter to define the function of the digital output, for example whether the output should work as a pulse output or as a normal on/off output.

Parameter Index Range Format Default Example

DWTYPE#

1..28

0..2

0 = Pulse output, minimum 500 ms

1 = On/off

2 = On/off, and status is retained after restart

DWTYPE1 2

How to Do It

The syntax is:

PASSWORD_COMMAND_VALUE (where _ is a space)

Example that sets 'XXXX' to 17, where 'XXXX' is a command and 17 is a value:

If a password is used and the code is 1234: '1234 XXXX 17'
If no password is used: 'XXXX 17'

Note:

If the user is created as a VikMote userA VikMote user has limited access and can use ordinary daily functions such as switching an output on or off. or as a VikMote administratorA VikMote administrator has unrestricted access to all functions., the passwordAccess code used for SMS and voice calls, for example in the SMS command '1234 signal'. does not need to be used

Functions:

Question mark '?' is used to query the current value or lists
Asterisk '*' is used to delete the current value or entire lists
Exclamation mark '!' is used to delete selected values in lists