Field Instrument Guide | Driver Communication
Click here to see this page in full context
  1. Home >
  2. Shared Technologies >
  3. Field Interfaces >
  4. Driver Communication >
  5. Field Instrument Guide

Field Instrument Guide

Use this guide to select field instruments that are validated for Vikingegaarden equipment and Emiko logging.

For predictable commissioning and support, use instruments supplied or specified as part of the Vikingegaarden solution. Other instruments may need validation before they can be connected, scaled, logged, or supported.

Use DEVMODEL# for serial/driver devices and the product IO list for analog, digital, and 1-Wire instruments. Use Instrument Defaults when factory address, baud rate, or serial format values are needed during commissioning.

Connection paths

Path Typical instruments Where to continue
Serial / driver device Serial, Modbus, M-Bus, wireless M-Bus, and other supported driver devices. Use Device Model Setup, Instrument Defaults, DEVMODEL#, Network Profiles, and Gateway Profiles.
Analog input 4-20 mA and 0-10 V transmitters. Use the product IO list and Analog Transmitter Wiring.
Digital input / counter Pulse instruments such as rain gauges, meter pulses, and other count inputs. Use the product IO list. Detailed DI/counter setup pages will be expanded as the setup path is released.
1-Wire Simple temperature sensors, for example soil temperature. Use 1-Wire Temperature and the product IO list.

Energy meters

Device DEVMODEL# Connection path Purpose Notes
EMIKO - EMI511 101114101 RS485 Modbus RTU Energy registration in Emiko installations. -
EMIKO - EMI530 101114102 RS485 Modbus RTU CT-based pump or equipment energy registration. -
EMIKO - EMI540 101114103 RS485 Modbus RTU Direct-connected pump or equipment energy registration. -
Carlo Gavazzi - EM511 101101117 RS485 Modbus RTU Energy registration with the equivalent supported model. Supported equivalent.
Carlo Gavazzi - EM530 101101112 RS485 Modbus RTU CT-based energy registration with the equivalent supported model. Supported equivalent.
Carlo Gavazzi - EM540 101101114 RS485 Modbus RTU Direct-connected energy registration with the equivalent supported model. Supported equivalent.
Carlo Gavazzi - EM23 101101101 RS485 Modbus RTU Energy registration. -
Carlo Gavazzi - EM24 101101102 RS485 Modbus RTU Energy registration. -
Carlo Gavazzi - EM33 101101103 RS485 Modbus RTU Energy registration. -
Carlo Gavazzi - EM111 101101104 RS485 Modbus RTU Energy registration. -
Carlo Gavazzi - EM340 101101106 RS485 Modbus RTU Energy registration. -
Carlo Gavazzi - EM210 101101107 RS485 Modbus RTU Energy registration. -
Carlo Gavazzi - EM330 101101108 RS485 Modbus RTU Energy registration. -
Carlo Gavazzi - EM110 101101109 RS485 Modbus RTU Energy registration. -
Carlo Gavazzi - EM112 101101110 RS485 Modbus RTU Energy registration. -
Carlo Gavazzi - EM24W 101101111 Wireless M-Bus Wireless energy registration. -
Carlo Gavazzi - WM30 101101115 RS485 Modbus RTU Energy registration. -
Carlo Gavazzi - WM40 101101116 RS485 Modbus RTU Energy registration. -
Orno - OR-WE-516 101108101 Pulse or RS485 Modbus RTU Energy registration. -
Orno - OR-WE-525 101108102 Pulse or RS485 Modbus RTU Energy registration. -
Janitza - Auto 101112100 RS485 Modbus RTU Energy registration. Auto checks for a supported Janitza meter before using the Janitza read path.
Janitza - standard 101112101 RS485 Modbus RTU Energy registration. Specific Janitza standard model.

Heat meters

Device DEVMODEL# Connection path Purpose Notes
Kamstrup - MULTICAL 302102102101Wireless or wired M-BusHeat and thermal energy registration.-
Kamstrup - MULTICAL 602102102102Wireless or wired M-BusHeat and thermal energy registration.-
Kamstrup - MULTICAL 303102102103Wireless M-BusHeat and thermal energy registration.-
Kamstrup - MULTICAL 402102102104Wireless or wired M-BusHeat and thermal energy registration.-
Kamstrup - MULTICAL 403102102105Wireless M-BusHeat and thermal energy registration.-
Kamstrup - MULTICAL 603102102106Wireless or wired M-BusHeat and thermal energy registration.-
Kamstrup - MULTICAL 803102102108Wireless or wired M-BusHeat and thermal energy registration.-
Kamstrup - MULTICAL 801102102109Wireless or wired M-BusHeat and thermal energy registration.-
Kamstrup - MULTICAL 802102102110Wireless or wired M-BusHeat and thermal energy registration.-

Water meters

Device DEVMODEL# Connection path Purpose Notes
Kamstrup - MULTICAL 61103102101RS485 Modbus RTUWater consumption registration.-
Kamstrup - MULTICAL 62103102102RS485 Modbus RTUWater consumption registration.-
Kamstrup - MULTICAL 21103102103Wireless or wired M-BusWater consumption registration.-
Kamstrup - flowIQ 2200103102104Wireless M-BusWater consumption registration.-
Kamstrup - flowIQ 3100103102105Wireless M-BusWater consumption registration.-
Kamstrup - flowIQ 3200103102106Wireless M-BusWater consumption registration.-
Kamstrup - flowIQ Gateway103102107Gateway communicationWater-meter gateway registration.-
Kamstrup - flowIQ 2101103102108Wireless M-BusWater consumption registration.-
Kamstrup - MULTICAL 603 as water meter103102109Wireless or wired M-BusWater consumption registration.-
Sensus - HRI-B4103103101Pulse or wired M-BusWater-meter pulse/interface registration.-
Sensus - HRI-Mei B4103103102Pulse or wired M-BusWater-meter pulse/interface registration.-
Sensus - iPERL103103103Wireless M-BusWater consumption registration.-
Comac Cal - Flow 38103113101RS485 Modbus RTUWater flow registration.-

Weather and level sensors

Device DEVMODEL# Connection path Purpose Notes
Thies Clima - Auto107109100RS485 / serial driverAuto-detects supported Thies Hygro-Thermo-Baro variants before using the detected model path.Use for normal Thies Hygro-Thermo-Baro setup when the exact supported variant should be detected.
Thies Clima - Hydro Termo Baro107109101RS485 / serial driverAir temperature, relative humidity, and barometric pressure.-
Thies Clima - WSC10107109102RS485 / serial driverCompact weather station values.-
Thies Clima - WSC11107109103RS485 / serial driverWeather values such as wind, precipitation/status options, brightness/radiation, temperature, humidity, pressure, and GPS/time data.-
GILL - MaxiMet GMX600107110101RS485 / serial driverCompact weather station values including wind, temperature, humidity, pressure, precipitation, and compass/GPS options.-
OTT CBS - Bubble Sensor107111101RS485 / serial driverWater level by bubble sensor principle.-
Siemens - SITRANS LR110107116101RS485 / serial driver80 GHz radar level measurement up to 15 m.-
Siemens - SITRANS LR120107116102RS485 / serial driver80 GHz radar level measurement up to 30 m.-

Thies Clima Auto uses 107109100 to identify supported Hydro Termo Baro variants. Only 1.1006.54.081 has the specific setup row 107109101.

Thies variant Use Notes
1.1006.54.080107109100 AutoAuto-detected Hydro Termo Baro variant.
1.1006.54.081107109100 Auto or 107109101Specific setup row is available when this exact variant must be documented.
1.1006.54.087107109100 AutoAuto-detected Hydro Termo Baro variant.
1.1006.54.141107109100 AutoAuto-detected Hydro Termo Baro variant.
1.1006.54.160107109100 AutoAuto-detected Hydro Termo Baro variant.
1.1006.54.161107109100 AutoAuto-detected Hydro Termo Baro variant.
1.1006.54.741107109100 AutoAuto-detected Hydro Termo Baro variant.
1.1006.54.749107109100 AutoAuto-detected Hydro Termo Baro variant.
1.1006.54.760107109100 AutoAuto-detected Hydro Termo Baro variant.
1.1006.54.761107109100 AutoAuto-detected Hydro Termo Baro variant.
1.1006.54.762107109100 AutoAuto-detected Hydro Termo Baro variant.
1.1006.54.780107109100 AutoAuto-detected Hydro Termo Baro variant.
1.1006.54.781107109100 AutoAuto-detected Hydro Termo Baro variant.

Analog input instruments

Analog instruments use controller analog inputs. They do not use DEVMODEL# unless a separate driver profile is specified.

Instrument Connection path Purpose Where to continue
Thermo/Hygro transmitter 2 x AI Temperature and humidity measurement through analog transmitter signals. Analog Transmitter Wiring
Generic 4-20 mA or 0-10 V transmitter AI Project-specific temperature, pressure, level, humidity, or other analog measurement. Analog Transmitter Wiring

Digital input / counter instruments

Digital input and counter instruments expose pulses or contact changes. Detailed DI/counter setup pages will be expanded as the setup path is released.

Instrument Connection path Purpose Setup status
Rain Gauge Professional DI/counter pulse input Precipitation measurement by pulse counting, for example tipping-bucket style rain registration. Setup page pending.
Rain Gauge and Snow sensor Meteorological DI/counter pulse input and related field-instrument setup Precipitation and snow-related meteorological registration. Setup page pending.
Generic pulse instrument DI/counter pulse input Meter pulses, pulse flow, or other count-based field values. Setup page pending.

1-Wire instruments

1-Wire is used for simple temperature measurement where supported by the product IO list.

Instrument Connection path Purpose Where to continue
1-Wire temperature sensor 1-Wire Simple temperature values, for example soil temperature in agriculture installations. 1-Wire Temperature

Public revision 21/05/2026

Support | Contact | Feedback

Privacy | Cookies | Legal | Cookie settings

Vikingegaarden A/S | Tinnetvej 70, DK-7173 Vonge | CVR 30089375 | info@vikingegaarden.com

Copyright Vikingegaarden A/S 2026